Instabilelab
Art Kitchen 01: Wallpaper for kitchen splashbacks

Art Kitchen 01

Wallpaper for kitchen splashbacks
Designer: Instabilelab
Information for this product is available only to registered designers

Product Details: Art Kitchen 01, Wallpaper for kitchen splashbacks by Instabilelab

A project which goes beyond the old same kitchen backsplashes! Instabilelab reinterprets the classic firm backsplash, with an innovative solution made up with rolls, easy- and practical-to-apply. The wallcovering in fiberglass or fibratex finish is resistant to water and heat, thanks to the application of a two-components resin.

FIBRAGLASS – fiberglass non-woven fabric (weight 200 gr/sqm). Smooth texture satin effect. Fibraglass is suitable for indoor damp environments (bathroom and shower) and kitchen backsplash;.
Once coated with the resin provided, Fibraglass get the resistance necessary for the use in the above environments, highlighting the colors and the brightness of the printing.
FIBRATEX – fiberglass woven fabric (weight 200 gr/sqm). Texture made up of warp and weft closely woven. Fibratex is suitable both for indoor spaces (damp environments such as bathroom and shower and kitchen backsplash) and outdoor spaces;
Beyond its internal use, Fibratex can be installed in exteriors, using a specific different type of resin provided.

The wall covering in fiberglass can be applied in kitchens with countertop of minimum 60 cm where there is an induction hob and of minimum 65 cm where there is a gas stove.
Printable area: H. 75 x 500 cm, adaptable to fit any surface.

For technical features please refer to the Downloads section.

Downloads

Information for this product is available only to registered designers
Technical Drawings not available
Any questions?